MARQ Fog 400 LED | 400W Water-Based Special Effects Fog Machine with Red-Color LED Lights (Red)
On Sale Now! Free Shipping Included! Save 2% on the MARQ Fog 400 LED | 400W Water-Based Special Effects Fog Machine with Red-Color LED Lights (Red) by MARQ at Way North of Nashville. MPN: FOG 400 LED Red. Hurry! Limited time offer. Offer valid only while supplies last. For those moments when you need the perfect special effect, the MARQ Fog 400 LED delivers 1500 cubic-feet per minute of mood-inducing fog at the touch of a button. Unlike other inexpensive foggers, it has three single-color LEDs, and the included wired remote makes operation a snap. Fog 400 LED comes in four different housing colors, so it always fits right in. Note: MARQ’s water-based Fog Fluid Gallon, Fog Fluid Quart, and Fog Fluid 12oz sold separately. Frequently Asked Questions
Product Description & Reviews
For those moments when you need the perfect special effect, the MARQ Fog 400 LED delivers 1500 cubic-feet per minute of mood-inducing fog at the touch of a button. Unlike other inexpensive foggers, it has three single-color LEDs, and the included wired remote makes operation a snap. Fog 400 LED comes in four different housing colors, so it always fits right in. Note: MARQ’s water-based Fog Fluid Gallon, Fog Fluid Quart, and Fog Fluid 12oz sold separately. Frequently Asked Questions How do you know when the Fog 400 is ready for use? Here are some simple steps to setup your Fog 400. After unpacking the box, unscrew and remove the cap at the top of the tank. Fill the tank with a water-based fog fluid. Screw the cap back onto the top of the tank so it is secure. Connect Fog 400 LED to a power outlet. On the rear panel, set the Power Switch to the On position. The Fog 400 LED will begin warming up. Important: If the environment is significantly colder than the temperature of Fog 400 LED, you may need to wait for it to adjust to the ambient temperature. The light on the remote will light up when ready. Why is there no fog coming out? This unit will pump out the fog only when the unit is heated up, and the when the light on the wired remote is illuminated. When you plug in the Fog 400, it needs a few minutes to heat up in order to work. If the light on the remote control turns off during operation, this means the pump has stopped so that the Fog 400 LED can re-heat. The light will turn on again once it is ready to use. Also, it is important to check the gauge on the back to make sure there is adequate amount of fluid. Never run this unit dry! What type of fluid should I use? The type of fluid we recommend for the Marq Fog 400 is high-quality water-based fog fluid. You can purchase this from your local or online retailer. When and what should I clean the Fog 400 with? You should clean the Marq Lighting Fog 400 after any heavy use, or at the end of the season. It is important to check the filter to make sure it is clean and not clogged. We recommend using isopropyl alcohol to clean the filter and any other parts on the Marq Lighting Fog 400. Here is a short reference guide on how to clean the Fog 400 properly. After each use, power Fog 400 LED off, and wait for about 1 minute for it to cool down. Wipe its surfaces and empty tank using a soft, clean cloth. After every 40 hours of use, use Fog 400 LED as described above (in Setup and Usage), but use a mixture of 80% distilled water and 20% vinegar instead of the normal fluid. This will help remove build-up in the nozzle. Important: Do not clean Fog 400 LED using solvents or harsh detergents. Is the Fog 400LED available in different colors or come with different LED colors? The Marq Fog 400 is available in Red, White, Blue and Black. The Red Fog 400 has red LED's built in, the Blue Fog 400 has blue LED's, and the White and Black Fog 400 has amber LED's. My pump is clicking or ticking. Why? If your Marq Fog 400 is making any clicking or ticking sounds, it actually means it is working correctly. Auto heat cycles on and off and can make noise while performing such an operation, similar to the clicking and popping of heating pipes in a house. Further Technical Support Whether you are a customer or dealer, if you already own a Marq product, or if you just have pre-sales questions, the Marq technical support team is available to help! Visit the link below to connect with any of the following support options: online community support, phone support, email support. http://www.marqlighting.com/support Technical Specs Tank Capacity: 16.9 fl oz Remote Length: 3.3 feet Heat-up Time: 3 minutes Output: 1500 ft³/min Fluid Consumption: 0.13 fluid ounces/min Input Voltage Available in: 120 VAC, 60 Hz or 230 VAC, 50 Hz Power and Current: 400W 3.3A @ 120V, 60Hz Power and Current: 400W 1.7A @ 230V, 50Hz Weight: 3.8 lbs Dimensions(width × depth × height): 9.3” × 4.6” × 6.4” (including Mounting bracket) Package: 10.6” × 5.3” × 6.5” Fuse: 250V/5A Box Contents Fog 400 LED (Black) Power Cable Remote Control (wired) User Guide Safety & Warranty Manual
Features & Highlights
- 400W fogger
- Wired push-button remote for user activation
- Powder-coated housing color for unique look (red, white, blue, black)
- Colored LEDs for "pyro" effect
- Works with water-based fog fluids such as FogFluidGal, FogFluidQt, and FogFluid12oz from MARQ
inMusic Brands Inc.
One year parts and labor.
FOG 400 LED Red
inMusic Brands Inc.
4.6 x 6.4 x 9.3 inches
6.6 x 5.4 x 10.5 inches
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by MARQ, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
mpn: RJSMAC1, ean: 5025087001608,
The RockJam Lightshow Fog Machine is a fun product that can bring any party or occasion to life. The RockJam Lightshow Fog Machine is versatile to both small and medium size spaces, need more fog, simply push the button. The four inbuilt alternating LED lights can change an atmosphere from spooky to disco fever with a single press and it can even be set to react to your music, making it a great solution for DJ’s, party organisers and even theatre productions alike. The Rockjam Lightshow Fog
By Master FX, Inc.
Master Fog's Ground Clouds is an all around fast dissipating water based fog fluid. It's perfect for stage and studio applications when a thick white fog is needed, but doesn't need to hang around for long periods of time. It can be used for an abundance of applications. To start, Ground Clouds is perfect for realistic steam effects that are comparable to nitrogen bursts. For those of you who need the perfect indoor ground fog, Ground Clouds is the best fog fluid of it's kind. It works
By Reel EFX
The DF-50 haze fluid provides a safe, economical non-glycol Haze with no heat, working with the Reel EFX DF-50 Haze Machine. The DF-50 haze fluid produces haze with superior hang-time (3 hours plus) while using less than two ounces of fluid per hour. That translates into a low operating cost of about a penny per minute. The DF-50 Diffusion Hazer does not require a warm-up period, and can run for 35 hours on 2 liters of fog fluid. The fog fluid is odorless and when used properly leaves no
By Foamdaddy GEL Foam Solution
mpn: Foamdaddy GEL, ean: 0682318996130,
THE GEL IS CONCENTRATED SOLUTION: Dissolve in warm water. A paint mixer will dissolve the gel mixed with water in seconds. (Hand mixing takes a few minutes) 1 Gallon of GEL makes 5 gallons of Solution • Equivalent to 2.5 to 3.5 hours of run time. Biodegradable and Hypo Allergenic. Non-Staining. No Scent. This needs to be cut with 4 gallons of water before use. You provide extra buckets for storage. Cutting instructions: ,Mix each gallon of GEL with 4 gallons of warm water in large garbage can